832991-Transmission Brake

Installation

1. Remove woven pad from arm.

2. Drill center of arm pad with 7/32” hole with ½” bit to 1/16” sidewall.

3. Chamfer 7/32” hole with ¼” – 20 tap ½” deep.

4. Tap 7/32” hole with ¼” – 20 tap ½” deep.

5. Assemble button to arm using ¼”-20 x ½” countersunk Allen head screw.

Adjustment

1. Clutch pedal up.

2. Transmission brake arm held against gear.

3. Lengthen clevis on adjusting rod until pin can be inserted.

4. Insert clevis pin and key.