New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Allis-Chalmers 200 Tractor

Air Cleaner Components

Air Conditioning

Blower/Condenser Motors


Compressor Clutch Bearings

Compressor Clutches

Compressor/Compressor Kits

Electrical Parts

Expansion Valves

Receiver Driers


Cooling System & Related


Cab Parts


Cooling System

Engine Overhaul Kits

Engine Parts

301 CID Diesel

649 Diesel

Allis 649 Dsl.

Crankshaft & Components

Engine Related Parts

Gaskets/Gasket Sets



Front Axle/Steering Parts

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes

PTO Components

Rims & Wheels

Rear Rims, Wheel Disc, Related Parts

Rims, Power Adjust


Adaptor / Slider

Arm Rest Covers

Arm Rest Cushions

Back Cushion

Complete Seats

Fold-Up - Black Fabric

Fold-Up - Black Vinyl

Marathon - Black Fabric

Marathon - Black Vinyl


Seat Cushion

Super Deluxe

Service Manual

Decals and Emblems

Grille Components

Transmission & Rear Axle

More about the Allis-Chalmers 200

Production of the Allis-Chalmers 200 Tractor started in 1972 and continued until 1975. The Allis-Chalmers 200 Tractor first came out at a price of $14,125, but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Allis-Chalmers 200 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Sometimes, the parts compatibility is determined by the serial number of your Allis-Chalmers 200 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it on the torque housing, right side. The serial number starts from 1001 for a 1972 model, from 3344 for a 1973 model, from 6294 for a 1974 model, from 9250 for a 1975 model. They also have ball actuated disc brakes. The type II 3-point hitch is very reliable, capable to lift 4,600 lbs [2086 kg]. It is also worth noting that the PTO runs at 540,1000 rpms. The Allis-Chalmers 200 has an open center hydraulics system with a 7 gal [26.5 L] capacity. The pump does the job pushing 17.2 gpm [65.1 lpm] fluids in the hydraulics system.