New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for Allis-Chalmers 5050 Tractor

Belts

Cooling System & Related

Brakes

Clutch

Cooling System

Engine Overhaul Kits

Engine Parts

Filters

Front Axle/Steering Parts

Fuel System

Ignition & Electrical Parts

Rims & Wheels

Rear Rims, Wheel Disc, Related Parts

Rims, Front Wheel

Rims, Power Adjust

Seats

More about the Allis-Chalmers 5050

Production of the Allis-Chalmers 5050 Tractor started in 1977 and continued until 1983. The Allis-Chalmers 5050 Tractor first came out at a price of $20,720, but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Allis-Chalmers 5050 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Sometimes, the parts compatibility is determined by the serial number of your Allis-Chalmers 5050 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it under steering wheel. The serial number starts from 573461 for a 1977 model, from 579632 for a 1978 model, from 584000 for a 1979 model, from 591000 for a 1980 model, from 596014 for a 1981 model, from 597730 for a 1982 model, from 599191 for a 1983 model. Some Allis-Chalmers 5050 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with power assist steering. They also have differential mechanical contracting band brakes. The type II/I 3-point hitch is very reliable, capable to lift 3200 lbs [1451 kg]. It is also worth noting that the independent rear PTO runs at 540 rpms. The Allis-Chalmers 5050 has an open center hydraulics system with a 4.75 gal [18.0 L] capacity. The pump does the job pushing 6.47 gpm [24.5 lpm] fluids in the hydraulics system.