New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Case/Case IH 2294 Tractor

Air Conditioning

A/C Hose Lines/Kits

Blower Motors/Switches

Blower/Condenser Motors


Compressor Clutches

Compressor/Compressor Kits

Electrical Parts


Evaporator/Temp Controls

Expansion Valves

Receiver Driers



Cab Parts



Cooling System

Engine Overhaul Kits

Engine Parts

A504BDT CID Turbo Diesel

Case 504BDT Diesel

Case 504BDT dsl.

Engine Related Parts

Exhaust System Parts


Gaskets/Gasket Sets


Front Axle/Steering Parts

Fuel System

Case 504BDT Diesel

Injection Pumps/Injectors

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes

Exhaust Pipes


PTO Components

Rear Axle/Steering Parts

Tie Rods and Ball Joints


Service Manual

Transmission & Rear Axle

More about the Case/Case IH 2294

The Case/Case IH 2294 Tractor first came out at a price of $47,000 (1987), but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Case/Case IH 2294 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Be sure to look for any serial number comments in the part fit notes. In some cases, the Case/Case IH 2294 Tractor parts you need depend on your serial number. You can find the serial number inside cab or on right-front frame. Serial numbers include 9931808 from 1984 models, 9938113 from 1985, 9941577 from 1986, 9945448 from 1987, 9949350 from 1988. Some Case/Case IH 2294 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have differential hydraulic wet disc brakes. The type 3/2 3-point hitch is very reliable. It is also worth noting that the independent rear PTO runs at 540/1000 rpms. The Case/Case IH 2294 has a closed center hydraulics system with a 25 gal [94.6 L] capacity. The pump does the job pushing 23 gpm [87.1 lpm] fluids in the hydraulics system.