New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Case/Case IH 485 Tractor


Cooling System & Related


Cab Parts


Cooling System

Engine Overhaul Kits

Engine Parts

Engine Oil Pump, Cooler, and Related

Engine Related Parts

Exhaust System Parts


Gaskets/Gasket Sets

I.H. D179 Diesel


Front Axle/Steering Parts

Axle Related Parts

Axles and Knees

Spindles and Related Parts

Steering Arms and Shafts

Steering Cylinders and Repair Kits

Steering Related Parts

Tie Rods and Ball Joints

Wheel Bearings and Sleeves

Wheel Components

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes

PTO Components

Rims & Wheels


Service Manual

Decals and Emblems

Transmission & Rear Axle

More about the Case/Case IH 485

The Case/Case IH 485 Tractor was manufactured between 1985 and 1991. The Case/Case IH 485 Tractor first came out at a price of $16,000 (1990), but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Case/Case IH 485 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Sometimes, the parts compatibility is determined by the serial number of your Case/Case IH 485 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it near front axle on right. The serial number starts from 15000 for a 1985 model, from 18000 for a 1986 model, from 19057 for a 1987 model, from 21250 for a 1988 model, from 23490 for a 1989 model, from 24938 for a 1990 model, from 26386 for a 1991 model. Some Case/Case IH 485 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with hydrostatic power steering. The type I,II 3-point hitch is very reliable, capable to lift 2,338 lbs [1060 kg]. It is also worth noting that the independent rear PTO runs at 540 rpms. The Case/Case IH 485 has an open hydraulics system with a 9 gal [34.1 L] capacity. The pump does the job pushing 15.9 gpm [60.2 lpm] fluids in the hydraulics system.