New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Case/Case IH 7150 Tractor

Air Conditioning

A/C Hose Lines/Kits

Blower/Condenser Motors


Compressor Clutches

Compressor/Compressor Kits


Electrical Parts


Evaporator Cores/Shut-Off Valve

Expansion Valves

O-rings/ Fittings/ Misc

Receiver Driers



Cab Parts


Cooling System

Draft Sensing Parts

Engine Overhaul Kits

Engine Parts

Case/Cummins 6T830 Diesel

Case/Cummins 6TA830 Diesel

Case/Cummins 6TA830 dsl.

Engine Oil Pump, Cooler, and Related

Engine Related Parts

Gaskets/Gasket Sets


Front Axle/Steering Parts

Axle Related Parts

Front Axle Components

Spindles and Related Parts

Steering Arms and Shafts

Steering Cylinders and Repair Kits

Steering Related Parts

Tie Rods and Ball Joints

Wheel Components

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts



PTO Components

Rear Axle/Steering Parts

Tie Rods and Ball Joints


Hoods, Cowls, Grilles, Panels, Screens

Transmission & Rear Axle

More about the Case/Case IH 7150

Case/Case IH started producing the 7150 Tractor in 1990 and continued until 1993. Regardless of whether you initially got a deal on your tractor (lower than the initial price of $115,000 (1993)), with TractorJoe you'll get the best deal on the spare parts you need. You can find in our inventory every kind of spare part you might need to keep your Case/Case IH 7150 Tractor running smoothly. Sometimes, the parts compatibility is determined by the serial number of your Case/Case IH 7150 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it on the floor, inside the tractor's cab. The serial number starts from JJA0018838 for a 1990 model, from JJA0030160 for a 1991 model, from JJA0039300 for a 1992 model, from JJA0046350 for a 1993 model. They also have differential hydraulic wet disc brakes. The type III 3-point hitch is very reliable, capable to lift 12720 lbs [5769 kg]. It is used with an electronic lower link. It is also worth noting that the independent rear PTO runs at 1000 (1.75) rpms. The Case/Case IH 7150 has a closed center pressure flow compensated (PFC) hydraulics system with a 50.5 gal [191.1 L] capacity. The pump does the job pushing 22 gpm [83.3 lpm] fluids in the hydraulics system.