New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for Case/Case IH C100 Tractor

Air Conditioning

Belts

Cooling System & Related

Brakes

Cab Parts

Clutch

Cooling System

Engine Parts

Filters

Front Axle/Steering Parts

Hydraulic System

Ignition & Electrical Parts

Rims & Wheels

Seats

Transmission & Rear Axle

More about the Case/Case IH C100

The first Case/Case IH C100 Tractors went out of the factory gates in 1998 and they kept building them until 2002. The Case/Case IH C100 Tractor first came out at a price of $30,500 (1999), but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Case/Case IH C100 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Be sure to look for any serial number comments in the part fit notes. In some cases, the Case/Case IH C100 Tractor parts you need depend on your serial number. You can find the serial number near the tractor steering column on right side. Serial numbers include JJE1000056 from 1998 models, JJE1008492 from 1999, JJE1013490 from 2000, JJE1017672 from 2001, JJE1019985 from 2002. Some Case/Case IH C100 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have differential hydraulic wet disc brakes. The type II/I 3-point hitch is very reliable, capable to lift 3,665 lbs [1662 kg]. It is used with a mechanical. It is also worth noting that the independent rear PTO runs at 540 rpms. The Case/Case IH C100 has an open center hydraulics system with a 9 gal [34.1 L] (2WD) capacity. The pump does the job pushing 12.7 gpm [48.1 lpm] fluids in the hydraulics system.