New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Case/Case IH CX50 Tractor

Air Conditioning


Cooling System & Related


Cab Parts


Cooling System

Engine Parts



Power Steering/ Hydraulic Filters

Front Axle/Steering Parts

Hydraulic System

Ignition & Electrical Parts


Rims & Wheels

Transmission & Rear Axle

More about the Case/Case IH CX50

You may have gotten a good deal and purchased your Case/Case IH CX50 Tractor for less than the initial price of $24,000 (1999), but when it comes to spare parts for the Case/Case IH CX50 Tractor, you will always get the best deal with us. Sometimes, the parts compatibility is determined by the serial number of your Case/Case IH CX50 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it near the tractor steering column on right side. The serial number starts from JJE1000056 for a 1998 model, from JJE1008492 for a 1999 model, from JJE1013490 for a 2000 model, from JJE1017672 for a 2001 model, from JJE1019985 for a 2002 model. Some Case/Case IH CX50 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have differential hydraulic wet disc brakes. The type II/I 3-point hitch is very reliable, capable to lift 3,665 lbs [1662 kg]. It is used with an electronic upper link. It is also worth noting that the independent rear PTO runs at 540 rpms. The Case/Case IH CX50 has an open center hydraulics system with a 9.1 gal [34.4 L] (2WD) capacity. The pump does the job pushing 13.7 gpm [51.9 lpm] fluids in the hydraulics system.