Parts for Case/Case IH PUMA 180 Tractor
Ignition & Electrical Parts
More about the Case/Case IH PUMA 180
The Case/Case IH PUMA 180 Tractor was manufactured between 2007 and 2010. Make sure you have access to your tractor serial number, because there is a chance that the Case/Case IH PUMA 180 parts you need depend on that serial number. Some Case/Case IH PUMA 180 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have differential hydraulic wet disc brakes. The type II/IIIN 3-point hitch is very reliable, capable to lift 12,787 lbs [5800 kg]. It is also worth noting that the independent rear PTO runs at 540/1000 (1-3/8) rpms and the fact that there are not many tractors equipped with an optional front PTO like this one. The Case/Case IH PUMA 180 has a pressure flow compensating (PFC) hydraulics system with a 26.5 gal [100.3 L] capacity. The pump does the job pushing 31.7 gpm [120.0 lpm] *Standard flow with power shift transmission fluids in the hydraulics system.