New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for Ford/New Holland 1920 Tractor


Belts: Alt, Fan, Steering, Water Pump



Cooling System


Front Axle/Steering Parts

Fuel System

Hitch & Drawbar Parts

Ignition & Electrical Parts

Mufflers/Exhaust Pipes



Service Manual

More about the Ford/New Holland 1920

The first Ford/New Holland 1920 Tractors went out of the factory gates in 1987 and they kept building them until 2000. Sometimes, the parts compatibility is determined by the serial number of your Ford/New Holland 1920 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it on the transmission, left side. The serial number starts from UP21001 for a 1987 model, from UP21710 for a 1988 model, from UP24896 for a 1989 model, from UP27299 for a 1990 model, from UP29354 for a 1991 model, from UP30817 for a 1992 model, from UP32448 for a 1993 model, from UP34038 for a 1994 model, from UP35988 for a 1995 model, from UP37672 for a 1996 model, from UP39076 for a 1997 model, from UP41105 for a 1998 model, from UP43277 for a 1999 model. Some Ford/New Holland 1920 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with power steering. They also have wet disc brakes. The type I 3-point hitch is very reliable. It is used with a draft control optional. It is also worth noting that the transmission rear PTO runs at 540 rpms. The Ford/New Holland 1920 has an open center hydraulics system with a 7.7 gal [29.1 L] capacity. The pump does the job pushing 7.8 gpm [29.5 lpm] fluids in the hydraulics system.