New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for John Deere 4755 Tractor

Air Conditioning

A/C Hose Lines/Kits

Blower/Condenser Motors

Blower/Controls

Compressor Clutches

Compressor/Compressor Kits

Condensers

Electrical Parts

Evaporator

Evaporator/Temp Controls

Expansion Valves

Heater Control Valves

O-rings/ Fittings/ Misc

Receiver Driers

Valve

Belts

Brakes

Cab Parts

Clutch

Cooling System

Engine Overhaul Kits

Engine Parts

6.076T, 6.076A, 6.076H, Diesel

6076 Diesel

6076 Turbo Diesel

Crankshaft & Components

Engine Oil Pump, Cooler, and Related

Engine Related Parts

Exhaust System Parts

Flywheels/Components

Gaskets/Gasket Sets

Turbos & Components

Valves/Guides/Springs/Locks

Filters

Front Axle/Steering Parts

Axle Related Parts

Front Support Parts

General

Pivot Components

Spindles and Related Parts

Steering Arms and Shafts

Tie Rods and Ball Joints

Wheel Bearings and Sleeves

Wheel Components

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes

PTO Components

Rims & Wheels

Seats

Service Manual

Transmission & Rear Axle

More about the John Deere 4755

John Deere started producing the 4755 Tractor in 1989 and continued until 1991. The original price of the John Deere 4755 Tractor was $73,000. If you got it for less, you found a great deal! TractorJoe has plenty of John Deere 4755 parts to keep it running. Be sure to look for any serial number comments in the part fit notes. In some cases, the John Deere 4755 Tractor parts you need depend on your serial number. Serial numbers include 1001 from 1989 models, 3001 from 1990, 6501 from 1991. Some John Deere 4755 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with hydrostatic power steering. They also have hydraulic wet disc brakes. The type III 3-point hitch is very reliable, capable to lift 5,821 lbs [2640 kg]. It is also worth noting that the independent rear PTO runs at 1000 rpms. The John Deere 4755 has a closed cetner hydraulics system with a 18.5 gal [70.0 L] (PowerShift) capacity. The pump does the job pushing 29.5 gpm [111.7 lpm] fluids in the hydraulics system.