New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for John Deere 4760 Tractor

Air Conditioning

A/C Hose Lines/Kits

Blower/Condenser Motors

Blower/Controls

Compressor Clutches

Compressor/Compressor Kits

Condensers

Electrical Parts

Evaporator

Evaporator/Temp Controls

Expansion Valves

Heater Control Valves

O-rings/ Fittings/ Misc

Receiver Driers

Valve

Belts

Brakes

Cab Parts

Clutch

Cooling System

Engine Overhaul Kits

Engine Parts

6.076T, 6.076A, 6.076H, Diesel

6076 Diesel

6076 Turbo Diesel

Crankshaft & Components

Engine Oil Pump, Cooler, and Related

Engine Related Parts

Exhaust System Parts

Flywheels/Components

Gaskets/Gasket Sets

Turbos & Components

Valves/Guides/Springs/Locks

Filters

Front Axle/Steering Parts

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes

Mufflers/Components

PTO Components

Rims & Wheels

Seats

Transmission & Rear Axle

More about the John Deere 4760

Sometimes, the parts compatibility is determined by the serial number of your John Deere 4760 Tractor, and that info should be listed on the part fit notes. If you don't have the serial number of your tractor, you can find it on the rear of transmission. The serial number starts from 1001 for a 1992 model, from 2941 for a 1993 model, from 5701 for a 1994 model. Some John Deere 4760 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with power steering. They also have differential hydraulic wet disc brakes. The type 3/3N 3-point hitch is very reliable, capable to lift 8,283 lbs [3757 kg]. It is used with an electrohydraulic draft sensing. It is also worth noting that the independent rear PTO runs at 1000 rpms. The John Deere 4760 has a closed center hydraulics system with a 19.8 gal [74.9 L] capacity. The pump does the job pushing 35.2 gpm [133.2 lpm] (Quad Range) fluids in the hydraulics system.