New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts

Parts for John Deere 4960 Tractor

Air Conditioning

A/C Hose Lines/Kits

Blower/Condenser Motors


Compressor Clutches

Compressor/Compressor Kits


Electrical Parts


Evaporator/Temp Controls

Expansion Valves

Heater Control Valves

O-rings/ Fittings/ Misc

Receiver Driers




Cab Parts

Cooling System

Engine Overhaul Kits

Engine Parts

6.076T, 6.076A, 6.076H, Diesel

6076 Diesel

6076 Turbo Diesel

Crankshaft & Components

Engine Oil Pump, Cooler, and Related

Engine Related Parts

Exhaust System Parts


Gaskets/Gasket Sets

Turbos & Components



Front Axle/Steering Parts

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

Mufflers/Exhaust Pipes


PTO Components

Rims & Wheels


Transmission & Rear Axle

More about the John Deere 4960

Production of the John Deere 4960 Tractor started in 1992 and continued until 1994. Be sure to look for any serial number comments in the part fit notes. In some cases, the John Deere 4960 Tractor parts you need depend on your serial number. You can find the serial number on the rear of transmission. Serial numbers include 1001 from 1992 models, 4535 from 1993, 7901 from 1994. Some John Deere 4960 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have differential hydraulic wet disc brakes. The type 3/3N 3-point hitch is very reliable, capable to lift 10,041 lbs [4554 kg]. It is used with an electrohydraulic draft sensing. It is also worth noting that the independent rear PTO runs at 1000 rpms. The John Deere 4960 has a closed center hydraulics system with a 19.8 gal [74.9 L] capacity. The pump does the job pushing 30.6 gpm [115.8 lpm] fluids in the hydraulics system.