- Get Parts
Parts for Kubota B7100HST Tractor
- 7-1/4" Disc - Woven, w/ 3/4" 14 Spline Hub - New K66905-13300N
- 7-1/4' Diaphram PPA - New K66591-13400N
- 7-1/4' Disc - Reman, Woven w/ 3/4' 14 Spline Hub K66905-13300
- 7-1/4' Pressure Plate Assembly - Reman K66591-13400
More about the Kubota B7100HST
In 1977, the very first Kubota B7100HST Tractors went out. They were produced until 1997. Make sure you have access to your tractor serial number, because there is a chance that the Kubota B7100HST parts you need depend on that serial number. Usually, the serial number is printed on the clutch housing, left side. That serial number is determined by the year of manufacturing, so for a 1980 model, it starts with 10157, for a 1981 model it starts with 11035, for a 1982 model it starts with 13305, for a 1983 model it starts with 51426, for a 1984 model it starts with 53433, for a 1991 model it starts with 63826, for a 1992 model it starts with 65176, for a 1993 model it starts with 68005, for a 1994 model it starts with 71302. Some Kubota B7100HST Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with manual steering. They also have differential mechanical expanding shoe brakes. The type I 3-point hitch is very reliable, capable to lift 1036 lbs [469 kg]. It is also worth noting that the PTO runs at 540/850 rpms. The Kubota B7100HST has an open center hydraulics system with a 3.6 gal [13.6 L] capacity. The pump does the job pushing 3 gpm [11.4 lpm] fluids in the hydraulics system.