New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for Massey Ferguson 1250 Tractor

More about the Massey Ferguson 1250

The first Massey Ferguson 1250 Tractors went out of the factory gates in 1992 and they kept building them until 2002. Sometimes, the parts compatibility is determined by the serial number of your Massey Ferguson 1250 Tractor, and that info should be listed on the part fit notes. The serial number starts from A00001 for a 1992 model, from B00001 for a 1993 model, from C00001 for a 1994 model, from D00001 for a 1995 model, from E00001 for a 1996 model, from FF00001 for a 1997 model, from GF00001 for a 1998 model, from HF00001 for a 1999 model, from JF00001 for a 2000 model, from KF00001 for a 2001 model. Some Massey Ferguson 1250 Tractors have a 4x2 2WD chassis, but there are also some with a 4x4 MFWD 4WD chassis, all equipped with power assist steering. They also have wet disc brakes. The type I 3-point hitch is very reliable, capable to lift 9,645 lbs [4374 kg], capable to lift 2866 lbs [1300 kg]. It is used with a position control. It is also worth noting that the independent rear PTO runs at 540 (1.375) rpms. The Massey Ferguson 1250 has an open center hydraulics system with a 6.6 gal [25.0 L] capacity. The pump does the job pushing 6.3 gpm [23.8 lpm] fluids in the hydraulics system.