New Ag & Industrial Parts / Leading Warranty / Fast Shipping / Low Prices / 90,000+ Parts
  • Get Parts

Parts for Massey Ferguson 3120 Tractor

Air Cleaner Components

Air Conditioning

Belts

Brakes

Cab Parts

Clutch

Cooling System

Engine Overhaul Kits

Engine Parts

1006.60T Diesel

Camshaft & Components

Engine Related Parts

Gaskets/Gasket Sets

Perkins 1006.6 Diesel

Filters

Front Axle/Steering Parts

Fuel System

Hitch & Drawbar Parts

Hydraulic System

Ignition & Electrical Parts

PTO Components

PTO Shafts/Gears/Components

Rims & Wheels

Seats

Transmission & Rear Axle

More about the Massey Ferguson 3120

Production of the Massey Ferguson 3120 Tractor started in 1993 and continued until 1995. The Massey Ferguson 3120 Tractor first came out at a price of $48,000 (1992), but you might be one of the lucky ones who found a good deal lower than that. The bad news is that, like any other tractor, the Massey Ferguson 3120 Tractor needs spare parts to keep it running; the good news is that we have all the parts you need at 60% off dealer prices in our inventory. Make sure you have access to your tractor serial number, because there is a chance that the Massey Ferguson 3120 parts you need depend on that serial number. Usually, the serial number is printed behind the tractor cab on the right side. That serial number is determined by the year of manufacturing, so for a 1990 model, it starts with R001001, for a 1991 model it starts with S001001, for a 1992 model it starts with A001001. Some Massey Ferguson 3120 Tractors have a 4x4 MFWD 4WD chassis, but there are also some with a 4x4 MFWD 4WD (optional) chassis, all equipped with hydrostatic power steering. They also have hydraulic wet disc brakes. The type II 3-point hitch is very reliable, capable to lift 14,330 lbs [6500 kg]. It is used with a position and electronic draft control. It is also worth noting that the independent rear PTO runs at 540/1000 rpms. The Massey Ferguson 3120 has an open center hydraulics system with a 16.9 gal [64.0 L] capacity. The pump does the job pushing 13.74 gpm [52.0 lpm] fluids in the hydraulics system.